DisplayPort Receiver
· Compliant with DisplayPort Specification V1.2a at 1.62/2.7/5.4 Gbps data rate (Low bit rate/High bit rate)
· Support flexible 1/2/4 lanes configurations; Full 21.6 Gbps data rate support (4 lanes at 5.4 Gbps)
· Support DPCD Rev.1.2
· Support HDCP 1.3/2.3 with HDCP key embedded
· Support 3D display left/right field/frame
· Support Spread Spectrum Clocking up to 0.5% down-spread to reduce EMI
· Bi-direction Color Space Conversion (CSC) between RGB and YCbCr color spaces with programmable coefficients
· Support 8-channel, uncompressed LPCM I2S audio with sample rates of 32~192 kHz and sample sizes of 16~24 bits, and HBR audio
· Automatic loss of signal detection for Link management
· Intelligent, programmable power management
· Embedded two blocks EDID RAM to saving BOM cost
· Compliance with "DP only" or "DP++" source device
TTL Output
· Support Single-channel TTL output with 30 bits data (10 bit deep color) up to 4K x 2K@30 Hz resolution with DDR mode
· Support Dual-channel TTL output with each channel 30 bits data (10 bit deep color), total is 60 bits
· On Dual-channel TTL DDR mode, the Max. clock rate is up to 150 Mhz, the data rate is up to 300 Mhz
· The Max. resolution is up to 4K x 2K@60 Hz with 30 bpp, or 1920 x 1200@120 with 30 bpp in Dual-channel TTL DDR mode for YUV422.
· Support MSB-LSB reversal and R-B channel Swap
Common Features
· Support up to 1080P@120Hz, 4K x 2K@60 Hz CEA display format
· Support DP input color depth 6/8/10/12 bits
· Support TTL output color depth 8/10 bits
· 4 I2S interface supporting 8-channel audio with sample rates of 32~192 kHz and sample sizes of 16~24 bits
· S/PDIF interface supporting PCM digital audio at up to 192 kHz frame rate
· HBR audio up to 768 kHz
· Automatic Audio Error detection with soft mute function, preventing annoying harsh output sound due to audio error or hot-unplug
· 128-pin LQFP (14mm x 14mm) package
· RoHS Compliant (100% Green available)