IT6695: Single Chip HDMI to VGA Converter with Embedded MCU
The IT6695FN is a high-performance single-chip HDMI to VGA converter. Combined with HDMI 1.4b receiver and triple DACs, the IT6695FN supports HDMI input and VGA output by conversion function. The build-in HDMI receiver is fully compliant with and HDMI 1.4b specification. With HDMI 1.4b receiver, the IT6695FN can support resolutions up to Full HD ( 1080P ), WUXGA and UXGA. Also the build-in triple DACs can support up to 10 bit deep colors.
The single chip IT6695 FN provides high performance, cost effective, HDMI to VGA conversion function, and it can help modern NB s like ultrabooks and tablets to be compatible with traditional VGA only projectors, monitors, and TVs.
With Embedded MCU and Flash, IT6695 FN is easy to program thru the ISP interface. Customers need no external Flash and MCU to save the BOM cost and board size.
HDMI 1.4 RX:
• Single-port HDMI1.4b receiver.
• Compliant with HDMI1.4b, DVI 1.0 specifications.
• Supporting link speeds of up to 1.9Gbps (link clock rate of 190MHz).
• Auto-calibrated input termination impedance provides process-, voltage- and temperature-invariant matching to the input transmission lines.
• HDMI mode auto detection.
• Video output format support RGB.
• Bi-direction Color Space Conversion (CSC) between RGB and YCbCr color spaces with programmable coefficients.
• Digital audio output interface supporting (with crystal on board)
• Integrated programmable EDID RAM.
VGA DACs:
• Tripe 10-Bit DAC Converters
• 200 MSPS Throughput Rate
• Complementary Outputs
• DAC Output Current Range 2mA to 18.5mA
Combined:
• Support up to Full HD (1080P@60hz) CEA display format
• Support up to WUXGA(1920X1200 RB mode) and UXGA(1600x1200) VESA display format
• Support HDMI Input deep color depth up to 10bit, and support VGA output deep color depth up to 10bit
• Embedded MCU and Flash
• 48-pin QFN (6mm x 6mm) package
• RoHS Compliant (100% Green available)