Video Link / MIPI

IT6151FN : MIPI to eDP Converter

The IT6151 is a high-performance and low-power MIPI to eDP converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and eDP 1.3 specifications. The IT6151 supports four lanes MIPI RX and four lane eDP TX interface. The data transfer rate of MIPI RX is up to 1Gbps per lane and both RBR/HBR are supported by eDP TX interface.

To reduce the power consumption, Panel Self Refresh (PSR) function is supported by the IT6151. Various low power options are implemented to reduce the dynamic operation power when PSR function is enabled. Dedicated hardware pin or firmware control through I2C can easy set the IT6151 to standby mode which is the extremely low-power state used for no display condition. With flexible MIPI RX and eDP TX lane configurations, system can adopt the most adequate configuration for the selected display resolution. All the unused lanes can be set to power down mode to save further power.

The IT6151 provides a user-friendly firmware interface to control the eDP panel through MCCS. The DPCD registers can also be easily accessed by native AUX read/write commands. To assure the protected content is being sent to eDP panel other than a non-HDCP external DP sink, Alternative Scrambler Seed Reset (ASSR) and Alternative Framing are also supported by the IT6151. With 6x6mm small package and low power consumption, the IT6151 is suitable for mobile products nowadays.

隱私權政策


本公司對個人資料的蒐集、處理、利用及保護,均依中華民國「個人資料保護法」及相關法令辦理。本公司不會主動擷取您的個人資料。您所提供的資料,本公司將恪遵政府相關法令及資訊管理原則,採用網路防火牆並輔以入侵偵測系統及防毒機制保護資訊系統,避免不法侵入及惡意程式之破壞。


CLOSE