PC I/O & KBC / PC Product Line

IT8728F: Legacy LPC Super I/O

The IT8728F is a highly integrated Super I/O using the Low Pin Count Interface. It provides the most commonly used legacy Super I/O functionality plus the latest Environment Control initiatives, including H/W Monitor and Fan Speed Controller. The device’s LPC interface complies with Intel “LPC Interface
Specification Rev. 1.1”. The IT8728F is ACPI & LANDesk compliant.

The IT8728F features an enhanced hardware monitor providing three thermal inputs from remote thermal resistors, or thermal diode or diode-connected transistor (2N3904/2N3906). The device employs ITE’s innovative intelligent automatic Fan ON/OFF & speed control functions (SmartGuardian) to protect the system while reducing the system noise and power consumption. The Fan Speed Controller can control up to five fan speeds through five separate 256 steps of Pulse Width Modulation (PWM) output pins and monitor up to five FANs’ Tachometer inputs.

In addition, it features two 16C550 standard compatible enhanced UARTs performing asynchronous communication, one multi-mode high-performance parallel port supporting bi-directional Standard Parallel Port (SPP), Enhanced Parallel Port (EPP V. 1.7 and EPP V. 1.9), and IEEE 1284 compliant Extended Capabilities Port (ECP), one high-performance 2.88MB floppy disk controller with digital data separator, supporting two drives in 360K/720K/1.2M/1.44M/2.88M format, one integrated Keyboard Controller, eight GPIO ports controlling up to 57 GPIO pins, which can be individually enabled or disabled via software configuration registers, and IR interface supported.

Regarding eco-design of Energy-using Product (EuP), IT8728F provides not only a solution to reducing power consumption in S5 State but also Keyboard, Mouse, RI# and CIR wakeup events in S3/S5 State.

The IT8728F utilizes power-saving circuitry to reduce power consumption, and once a logical device is disabled, the inputs are inhibited with the clock disabled and the outputs are tri-stated. The device requires a single 24/48 MHz clock input and operates with +3.3V power supply. The IT8728F is available in 128-pin QFP (Quad Flat Package).    

 

PRIVACY POLICY


ITE complies with Taiwan’s Personal Information Protection Act to collect, process, use and protect personal information and will not take the initiative to acquire your personal data. The data you provide will be managed in compliant with the related laws and regulations and in the principle of our company’s information management, which employs the firewall, intrusion detecting system and virus protection mechanism to avoid the illegal hacking and damage from the malicious software.


CLOSE