- 8051 8-bit MCU
- 128KB flash memory
- 10KB SRAM data memory
- 4KB instruction cache
- Supports one UART interface
- Supports two 16-bit timers
- Supports Dual type-C port
- Supports dead battery wake-up
- Supports USB PD 3.0 protocol (chunk mode only)
- USB 2.0 Full-speed Device Controller
- Supports USB 2.0 full-speed device controller
- Compatible with USB 2.0 full-speed standard
- Built-in 1.5K-ohm pull-up
- Supports three end-points
- 5 ADC channels (AD0, AD1, AD4, AD5, AD7)
- 8 bits resolution
- Digital filter for noise reduction
- 5 comparator channels (CMP0, CMP1, CMP4, CMP5, CMP7)
- 64 comparing levels (6-bit)
- Supports one channel current sensing function (CS1P/CS1N)
- 8 bits resolution
- Digital filter for noise reduction
- Supports three multi-function GPIOs (GP0~1, GP12~18, GP24~25)
- Supports one 16-bit watchdog timer (32.768K Hz)
- Supports one 16-bit external timer (2.097M Hz)
- Compliant with DisplayPort specification v1.4a at 1.62/2.7/5.4/8.1 Gbps data rate (Low bit rate/High bit rate/High bit rate 2/High bit rate 3)
- Supports 1/2 lanes configurations; full 16.2 Gbps data rate support (2 lanes at 8.1 Gbps)
- Supports DPCD Rev. 1.4
- Supports metadata transport for static High Dynamic Range (HDR) for 4K60 422/420 mode
- Supports HDCP 1.3/2.3 with HDCP key embedded
- Single port HDMI transmitter
- Compliant with HDMI 2.0b, HDCP 1.4/2.3 and DVI 1.0 specification
- Supports Gamut Metadata packet for High Dynamic Range (HDR) for 4K60 422/420 mode
- Supports up to WUXGA (1920 x 1200@120 Hz), WQXGA (2560 x 1600 RB@120 Hz) VESA display format
- Supports up to 1080P@120 Hz, 4K x 2K@60 Hz CEA display format (with H-blank Expansion)
- Supports DP input color depth 6/8/10/12 bits
- Supports HDMI output color depth 8/10/12 bits
- QFN 64 pin (9 mm x 9 mm)
