DisplayPort Receiver

·  Compliant with DisplayPort Specification V1.2a at 1.62/2.7/5.4 Gbps data rate (Low bit rate/High bit rate)

·  Support flexible 1/2/4 lanes configurations; Full 21.6 Gbps data rate support (4 lanes at 5.4 Gbps)

·  Support DPCD Rev.1.2

·  Support HDCP 1.3/2.3 with HDCP key embedded

·  Support 3D display left/right field/frame

·  Support Spread Spectrum Clocking up to 0.5% down-spread to reduce EMI

·  Bi-direction Color Space Conversion (CSC) between RGB and YCbCr color spaces with programmable coefficients

·  Support 8-channel, uncompressed LPCM I2S audio with sample rates of 32~192 kHz and sample sizes of 16~24 bits, and HBR audio

·  Automatic loss of signal detection for Link management

·  Intelligent, programmable power management

·  Embedded two blocks EDID RAM to saving BOM cost

·  Compliance with "DP only" or "DP++" source device

TTL Output

·  Support Single-channel TTL output with 30 bits data (10 bit deep color) up to 4K x 2K@30 Hz resolution with DDR mode

·  Support Dual-channel TTL output with each channel 30 bits data (10 bit deep color), total is 60 bits

·  On Dual-channel TTL DDR mode, the Max. clock rate is up to 150 Mhz, the data rate is up to 300 Mhz

·  The Max. resolution is up to 4K x 2K@60 Hz with 30 bpp, or 1920 x 1200@120 with 30 bpp in Dual-channel TTL DDR mode for YUV422.

·  Support MSB-LSB reversal and R-B channel Swap

Common Features

·  Support up to 1080P@120Hz, 4K x 2K@60 Hz CEA display format

·  Support DP input color depth 6/8/10/12 bits

·  Support TTL output color depth 8/10 bits

·  4 I2S interface supporting 8-channel audio with sample rates of 32~192 kHz and sample sizes of 16~24 bits

·  S/PDIF interface supporting PCM digital audio at up to 192 kHz frame rate

·  HBR audio up to 768 kHz

·  Automatic Audio Error detection with soft mute function, preventing annoying harsh output sound due to audio error or hot-unplug

·  128-pin LQFP (14mm x 14mm) package

·  RoHS Compliant (100% Green available)