goldennet

返回

Video Link

IT66120FN: Low Power Transmitter with HDMI 1.4 3D

  • Product Information

  • Specification Table

  • Product Information

  • Specification Table

  • Download

Product Information

IT66120FN: Low Power Transmitter with HDMI 1.4 3D

The IT66120 is a high-performance and low-power single channel HDMI transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible with DVI 1.0 specifications. IT66120 also provides the HDMI 1.4 3D feature, which enables direct 3D displays through an HDMI link. The IT66120 serves to provide the most cost-effective HDMI solution for DTV-ready consumer electronics such as set-top boxes, DVD players and A/V receivers, as well as DTV-enriched PC products such as notebooks and desktops, without compromising the performance. Its backward compatibility with DVI standard allows connectivity to myriad video displays such as LCD and CRT monitors, in addition to the ever-so-flourishing Flat Panel TVs.


Aside from the various video output formats supported, the IT66120 also supports 2 channels of I2S digital audio, with sampling rate up to 192 kHz and sample size up to 24 bits. IT66120 also support S/PDIF input of up to 192 kHz sampling rate.


The newly supported High-Bit Rate (HBR) audio by HDMI Specifications v1.3 is provided by the IT66120 in the S/PDIF input port. The highest possible HBR frame rate is supported at up to 768 kHz.


By default the IT66120 comes with integrated ROMs which are pre-programmed with HDCP keys that ensures secure digital content transmission. Users need not worry about the procurement and maintenance of the HDCP keys.

Features

  • Single channel HDMI transmitter
  • Compliant with HDMI 1.3a, HDCP 1.2 and DVI 1.0 specifications
  • Support pixel rates from 25 MHz to 150 MHz
  • DTV resolutions: 480i, 576i, 480p, 576p, 720p, 1080i up to 1080p
  • PC resolutions: VGA, SVGA, XGA, SXGA
  • Support 8-bit YCbCr 4:2:2 (CCIR-656) video input interface
  • Single Data Rate (SDR) or Double Data Rate (DDR) optional
  • SYNC embedded or separated
  • Support HDMI 1.4 3D feature
  • Frame packing mode up to 1080P@23.98/24 Hz and 720P@59.94/60 Hz
  • Top and Bottom up to 1080P@59.94/60 Hz
  • Side-by-Side (Half) up to 1080P@59.94/60 Hz
  • Side-by-Side (Full) up to 720P@59.94/60 Hz
  • Bi-direction Color Space Conversion (CSC) between RGB and YCbCr color spaces with programmable coefficients
  • Digital audio input interface supporting
  • audio sample rate: 32~192 kHz
  • sample size: 16~24 bits
  • I2S interfaces supporting 2-channel audio
  • S/PDIF interface supporting PCM, Dolby Digital, DTS digital audio transmission at up to 192 kHz
  • Support for high-bit-rate (HBR) audio such as DTS-HD and Dolby TrueHD through the S/PDIF interface, with frame rates as high as 768 kHz
  • Compatible with IEC 60958 and IEC 61937
  • Software programmable HDMI output current, enabling user to optimize the performance for fixed-cable systems or those with pre-defined cable length
  • MCLK input is optional for audio operation; users could opt to implement audio input interface with or without MCLK
  • Integrated pre-programmed HDCP keys
  • Purely hardware HDCP engine increasing the robustness and security of HDCP operation
  • Monitor detection through Hot Plug Detection and Receiver Termination Detection
  • Embedded full-function pattern generator
  • Intelligent, programmable power management
  • Ultra low power consumption, operation power is less than 70 mw at 1080p@60 Hz format
  • 40-pin (5 x 5 mm) QFN package

Specification Table

After years of technology development, ITE has owned many types of advanced Silicon Intellectual Property (SIP) and highly integrated technology of system software/hardware.

PART NO.

PACKAGE TYPE

DESCRIPTION

FLASH SUPPORT

IT66120FN

40-QFN (5 mm x 5 mm)

Low Power Transmitter with HDMI 1.4 3D

Explore

Modal4

隱私權政策

‧說明
ITE遵守台灣的《個人資料保護法》來蒐集、處理、使用和保護個人資料,我們不會主動蒐集您的個人數據。

‧個人資料的蒐集及使用
在ITE官網進行基本的瀏覽、搜尋及下載行為時,網站不會進行任何個人資料的蒐集行為。若您使用網站的”聯絡我們”功能,本公司將會蒐集您的個人姓名、公司名稱、電子郵件及聯絡電話等個人資料。蒐集的訪客個資僅作為您提出問題的回覆及溝通使用,除本公司業務聯繫外,不做其他用途。網站會記錄使用者的上網IP、時間及瀏覽的網頁資料,供本公司對全體使用者的瀏覽行為進行分析,並不會對各別使用者進行分析。

‧ 蒐集資料的保全
ITE官網的任何資料傳遞均經由SSL加密,保障不被第三方竊取。您提供的數據將按照相關法律和本公司資料管理原則進行管理,該資料管理系統採用防火牆、入侵檢測系統和病毒防護機制,以避免非法駭客入侵和惡意軟件破壞。訪客個資(含問題及回復)原則保存5年,訪客可書面要求刪除個資。

‧Cookie使用
本網站將會記錄Cookie資訊,包含您使用的設備、來源IP位址及瀏覽的頁面,並不會蒐集您的個人資料。蒐集的資訊用來優化網站瀏覽的體驗,及進行網站瀏覽的統計分析,作為改善我們網站內容與服務的參考。您可以在瀏覽器設定修改對Cookie的接受程度,但若您拒絕所有的Cookie,本網站的某些功能將可能無法正常執行。

關閉