goldennet

返回

Video Link

IT6620BFN: ARC/eARC Receiver with Audio MUX

  • Product Information

  • Specification Table

  • Product Information

  • Specification Table

  • Download

Product Information

IT6620BFN: ARC/eARC Receiver with Audio MUX

The IT6620BFN is a receiver designed for HDMI 2.1 Enhanced Audio Return Channel (eARC) and it is also backward compatible to the HDMI 1.4 Audio Return Channel (ARC). When operating in eARC mode, the Differential Mode Audio Channel (DMAC) bandwidth, i.e. 98.304 Mbps, allows HDMI Sink to transmit 8-channel 192 K audio to the HDMI Source. No video stream and CEC function is required when eARC link is active.


The IT6620BFN adopts eight I2S and one SPDIF signals for the audio output interface. Eight I2S signals are used to transmit multi-channel L-PCM audio and the maximum 16-channel audio is supported by the IT6620BFN. When 16-channel audio is transmitted, the maximum audio sampling frequency is limited to 96 kHz because of the DMAC bandwidth limitation. Another available multi-channel interface is Time Division Multiplexed (TDM) interface which utilizes one I2S signal to transmit multi-channel audio, however, only 4/8/16-channel configuration is allowed. The SPDIF interface is used to transmit 2-channel compress audio, including High Bit Rate audio. A 128*Fs MCLK signal is also available for the SPDIF processor. Both I2S and SPDIF signals could be configured as DSD audio interface which is used to transmit One Bit Audio format and maximum 12-channel One Bit Audio layout is supported by the IT6620BFN.


In some systems, the output of IT6620BFN is connected to the audio processor which has only one audio input interface and needs to handle more than one audio input source. The IT6620BFN can multiplex external input audio with internal decoded audio and thus eliminates the necessary of extra audio MUX. The configuration of the embedded audio MUX is flexible and could be used for the most applications.


For the compress audio, 8-bit ECC syndrome is added to 16-bit audio data in the eARC TX, and 1-bit error in compress audio data could be corrected by HW in the IT6620BFN. To increase the security of the eARC audio transmission, a HW decryption mechanism is also implemented in the IT6620BFN. Because the content protection method is not a standard in eARC specification, the decryption mechanism of IT6620BFN is proprietary and only compatible with the ITE's eARC TX, such as IT6621. The FW of IT6621 would make sure the eARC RX is IT6620BFN before enabling the encryption option and this procedure can be done using Common Mode Data Channel (CMDC). Please refer to programming guide for the detail.


The CMDC in IT6620BFN provides bi-directional communication between eARC TX and RX. The Discovery and Disconnect process is implemented in HW and the FW can monitor the status by the interrupt and read back registers. In IT6620BFN, a 256-byte Capabilities Data Structure is embedded in the design and FW should initialize the content before setting EARC_HPD bit to '1'. The read/write access in IT6620BFN is accomplished by internal FSM and the FW just need to take care the ERX_LATENCY update when detecting the ERX_LATENCY_REQ is written by eARC TX.


In order to backward compatible with the ARC mode, the IT6620BFN also provides a complete solution of Consumer Electronics Control (CEC) function. This optional CEC feature of HDMI specification allows users to control two or more CEC-enabled devices through HDMI network. With this embedded CEC PHY, users can use high-level software API to easily implement all the necessary remote control commands. The CEC bus related protocol is handled by the CEC PHY, which eliminates extra loading of the MCU.

Features

  • Support HDMI 1.4 ARC mode and HDMI 2.1 eARC mode
  • Support single mode and common mode of HDMI 1.4 ARC
  • Support max. 98.304 Mbps bandwidth for DMAC mode
  • Support max. 16-channel layout when Multi-Channel L-PCM is transmitted
  • Support max. 12-channel layout when One Bit Audio is transmitted
  • Support H14b ACP, ISRC1/2 packets through U-bit message
  • Support decryption option
  • Support max. 16-channel I2S interface
  • Support max. 12-channel DSD interface
  • Support SPDIF interface with MCLK
  • Support TDM interface
  • Support HBR audio through SPDIF or 8-channel I2S interface
  • Support external MUTE signal
  • Support audio MUX function
  • Embedded 256-byte eARC RX capabilities data structure registers
  • Embedded hardware controlled CEC PHY
  • 40-pin QFN package

Specification Table

After years of technology development, ITE has owned many types of advanced Silicon Intellectual Property (SIP) and highly integrated technology of system software/hardware.

PART NO.

PACKAGE TYPE

DESCRIPTION

FLASH SUPPORT

IT6620BFN

40-pin QFN (5 mm x 5 mm)

ARC/eARC Receiver with Audio MUX

Explore

Modal4

隱私權政策

‧說明
ITE遵守台灣的《個人資料保護法》來蒐集、處理、使用和保護個人資料,我們不會主動蒐集您的個人數據。

‧個人資料的蒐集及使用
在ITE官網進行基本的瀏覽、搜尋及下載行為時,網站不會進行任何個人資料的蒐集行為。若您使用網站的”聯絡我們”功能,本公司將會蒐集您的個人姓名、公司名稱、電子郵件及聯絡電話等個人資料。蒐集的訪客個資僅作為您提出問題的回覆及溝通使用,除本公司業務聯繫外,不做其他用途。網站會記錄使用者的上網IP、時間及瀏覽的網頁資料,供本公司對全體使用者的瀏覽行為進行分析,並不會對各別使用者進行分析。

‧ 蒐集資料的保全
ITE官網的任何資料傳遞均經由SSL加密,保障不被第三方竊取。您提供的數據將按照相關法律和本公司資料管理原則進行管理,該資料管理系統採用防火牆、入侵檢測系統和病毒防護機制,以避免非法駭客入侵和惡意軟件破壞。訪客個資(含問題及回復)原則保存5年,訪客可書面要求刪除個資。

‧Cookie使用
本網站將會記錄Cookie資訊,包含您使用的設備、來源IP位址及瀏覽的頁面,並不會蒐集您的個人資料。蒐集的資訊用來優化網站瀏覽的體驗,及進行網站瀏覽的統計分析,作為改善我們網站內容與服務的參考。您可以在瀏覽器設定修改對Cookie的接受程度,但若您拒絕所有的Cookie,本網站的某些功能將可能無法正常執行。

關閉