goldennet

产品资讯

投资人服务

企业永续发展

关于联阳

最新消息

人才招募

联络我们

浏览更多

PRIVACY POLICY

返回

Video Link

IT6520: USB-C (DP Alt Mode) & Power Delivery Controller Built-in 4 Lane DP 1.4 to MIPI Converter

  • Poduct Information

  • Specification Table

  • Poduct Information

  • Specification Table

  • Download

Poduct Information

IT6520: USB-C (DP Alt Mode) & Power Delivery Controller Built-in 4 Lane DP 1.4 to MIPI Converter

The IT6520FN is a highly integrated USB type-C/PD controller with DisplayPort to MIPI converter. It is suitable for dongle application.


The IT6520FN has integrated type-C DFP/UFP/DRP resistors and controls logic with dead battery support. For the USB PD application, IT6520FN supports PD 2.0 completely, and PD 3.0 with the chunk mode completely. The built-in DisplayPort receiver is fully compatible with DisplayPort 1.4a and HDCP 1.3/2.3 specifications. With 4-Lane HBR3 (High-Bit-Rate 3) configuration.


The built-in MIPI transmitter is a high-performance 2-port MIPI transmitter, fully compliant with MIPI C-PHY V1.2/D-PHY V1.3 specifications and MIPI CSI-2 V1.3/DSI-2 V1.0 specification. This MIPI transmitter can support 30/24/16 bits RGB in DSI mode and 888/666/565/555/444 RGB, 10b/8b YUV422, YUV420_8b (legacy) format in CSI spec, and support CSI proprietary modes include YUV420_10b/YUV420_12b (legacy), YUV422 12b, 8b/10b/12b YUV444, 10b/12b RGB format.


Aside from the various video output formats supported, the IT6520FN also supports 8 channels digital audio, with sampling rate up to 192 kHz and sample size up to 24 bits, and HBR audio.


With embedded MCU and Flash, IT6520FN is easy to be programmed. Customers need no external Flash and MCU, which can save the BOM cost and board size.


Each IT6520FN comes preprogrammed with a unique HDCP key, in compliance with 1.3/2.3–Amendment for DisplayPort, so as to provide secure transmission of high-definition content. Users of the IT6520FN need not purchase any HDCP keys or ROMs.

Features

1.1 Display Port Receiver

  • Compliant with DisplayPort Specification V1.4a at 1.62/2.7/5.4/8.1 Gbps data rate (RBR/HBR/HBR2/HBR3)
  • Supports flexible 1/2/4 lanes configurations; full 32.4 Gbps data rate support (4 lanes at 8.1 Gbps)
  • Supports DPCD Rev. 1.4
  • Supports DSC pass-through mode
  • Supports static High Dynamic Range (HDR)
  • Supports HDCP 1.3/2.3 with HDCP key embedded
  • Supports 3D display left/right field/frame
  • Supports Spread Spectrum Clocking up to 0.5% down-spread to reduce EMI
  • Supports Horizontal Blanking Expansion
  • Supports eDP mode
  • Supports DP 1.4a Adaptive Sync
  • Bi-direction Color Space Conversion (CSC) between RGB 444 and YCbCr 444/422/420 color spaces with programmable coefficients
  • Supports 8-channel, uncompressed LPCM I2S audio and 2-chqnnel SPDIF with sample rates of 32~192 kHz and sample sizes of 16~24 bits, and 768 kHz HBR NLPCM audio
  • Automatic loss of signal detection for link management
  • Intelligent, programmable power management
  • Embedded four blocks EDID RAM or two blocks EDID + two blocks DisplayID to saving BOM cost
  • Compliant with "DP only" or "DP++" source device

1.2 MIPI Transmitter

  • Supports 2-port 1/2/4-lane MIPI-DPHY CSI/DSI transmission
  • Supports 2-port 1/2/3-trio MIPI-CPHY CSI/DSI transmission
  • D-PHY TX interface of up to 2.5 Gbps per lane
  • C-PHY TX interface of up to 5.7 Gbps per trio
  • Compliant with MIPI D-PHY V1.3 specifications and de-skew calibration
  • Compliant with MIPI C-PHY V1.2 specifications
  • Compliant with MIPI DSI-2 V1.0 Specification
  • Compliant with MIPI CSI-2 V1.3 Specification
  • D-PHY supports up to CEA-861 3840x2160@60Hz (RGB/YUV444 8pbc, YUV422 10bpc) and CVT 2560x1440@144Hz (RGB/YUV444 8pbc, YUV422 10bpc) by 2-port
  • C-PHY supports up to 3840x2160@144Hz (YUV422 8bpc, YUV420 10bpc) by 2-port
  • Supports 30/24/16 bits RGB in DSI mode
  • Supports 888/666/565/555/444 RGB, 10b/8b YUV422, YUV420_8b (legacy) format in CSI spec.
  • Supports CSI proprietary modes include YUV420_10b/YUV420_12b (legacy), YUV422 12b, 8b/10b/12b YUV444, 10b/12b RGB format
  • Supports Escape and ULPS mode
  • Supports Lane Swap and PN Swap
  • Supports interlaced mode and toggling frame number in CSI mode
  • Supports Sync pulse mode and Sync event mode in DSI operation
  • Supports internal pattern generator with external clock

1.3 Common Features

  • D-PHY supports up to CEA-861 3840x2160@60Hz (RGB/YUV444 8pbc, YUV422 10bpc) and CVT 2560x1440@144Hz (RGB/YUV444 8pbc, YUV422 10bpc) by 2-port
  • C-PHY supports up to 3840x2160@144Hz (YUV422 8bpc, YUV420 10bpc) by 2-port
  • Supports DP input color depth 6/8/10 bits
  • Supports MIPI output color depth 8/10/12 bits
  • Digital audio output interface supporting:

        -   8- channel audio with sample rates of 32~192 kHz and sample sizes of 16~24 bits

        -   S/PDIF interface supporting PCM digital audio at up to 192 kHz frame rate

        -   HBR audio up to 768 kHz

  • Automatic Audio Error detection with soft mute function, preventing annoying harsh output sound due to audio error or hot-unplug
  • Supports Information Block interface through I2C slave
  • DPRX to 2-port MIPITX supports Odd/Even and Left/Right mode
  • Supports Odd/Even and Left/Right swap function
  • DPRX to 2-port MIPITX supports single output mode and mirror output mode
  • Embedded Type-C CC/PD controller
  • Embedded MCU function and flash die
  • 100-pin QFN (10 mm x 10 mm) package
  • RoHS-compliant and Halogen-Free

Specification Table

After years of technology development, ITE has owned many types of advanced Silicon Intellectual Property (SIP) and highly integrated technology of system software/hardware.

PART NO.

PACKAGE TYPE

DESCRIPTION

FLASH SUPPORT

IT6520

100-pin QFN (10 mm x 10 mm)

USB Type-C & PD Built-in 4 Lane DP 1.4 to MIPI Converter

Explore

IT6122: MIPI to LVDS Converter

The IT6122 is a high-performance and low-power MIPI to LVDS converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and LVDS specifications. The IT6122 supports four lanes MIPI RX and 2-Link LVDS TX interface. The data transfer rate of MIPI RX is up to 1Gbps per lane and the LVDS TX supports as high as 1.05Gbps per channel.

IT6113: High Speed MIPI DSI 4 Lane to 8 Lane Bridge

The IT6113 MIPI DSI video bridge is a 4-lane-in, 8-lane-out high speed data converter/splitter. It integrates a 4-lane single–link MIPI DSI receiver and an 8-lane dual-link MIPI DSI transmitter. The DSI bridge may be configured to a half-rate data converter or a full-rate data splitter for different applications.

IT6510: 4 Lanes DisplayPort 1.2 to 4 Lane MIPI-CSI/DSI Converter

The IT6510 is a high-performance single-chip DisplayPort to MIPI-CSI/DSI converter. Combined with DisplayPort receiver, MIPI transmitter, the IT6510 support DisplayPort input and MIPI-CSI/DSI output by conversion function.

IT6616: HDMI 1.4 to MIPI CSI/DSI Converter

IT6616 is a high performance HDMI-to-MIPI video converter. It integrates an HDMI 1.4 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI D-PHY. For AR/VR, mobile or other display applications that require to translating HDMI protocol to MIPI CSI/DSI output, the IT6616 is an optimized low power and high quality solution.

IT6625: HDMI 2.0 to Dual Port MIPI CSI/DSI Converter

The IT6625 is a high performance HDMI-to-MIPI video converter. It integrates an HDMI 2.0 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI C-PHY/D-PHY. For AR/VR, mobile or other display applications requiring to translate the HDMI protocol to the MIPI output, the IT6625 is an optimized low power and high quality solution.

IT6626: HDMI 2.1 to Dual Port MIPI CSI/DSI Converter

The IT6626 is a high performance HDMI-to-MIPI video converter. It integrates an HDMI 2.1 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI C-PHY/D-PHY. For AR/VR, mobile or other display applications requiring to translate the HDMI protocol to the MIPI output, the IT6626 is an optimized low power and high quality solution.

IT6161: MIPI to HDMI Converter

The IT6161 is a high-performance and low-power MIPI to HDMI converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and HDMI 1.4b, HDCP 1.4 and backward compatible to DVI 1.0 specifications. The IT6161 supports four lanes MIPI RX and HDMI TX interface. The data transfer rate of MIPI RX is up to 1Gbps per lane.

IT6162: Dual port MIPI to HDMI 2.0 Converter with Embedded MCU

The IT6162 is a high-performance and low-power dual-port MIPI DSI to HDMI 2.0 converter. It receives one or dual port MIPI DPHY input with low-quality MIPI cables, and converts it to TMDS output, of which current levels and pre-emphasis are both programmable.

IT6151FN: MIPI to eDP Converter

The IT6151 is a high-performance and low-power MIPI to eDP converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and eDP 1.3 specifications. The IT6151 supports four lanes MIPI RX and four lane eDP TX interface. The data transfer rate of MIPI RX is up to 1Gbps per lane and both RBR/HBR are supported by eDP TX interface.

IT6152: Dual-port MIPI to DisplayPort 1.4 Converter with Embedded MCU

The IT6152 is a high-performance and low-power dual-port MIPI to DisplayPort converter. With two MIPI receivers and one DisplayPort transmitter, the IT6152 converts dual or single port MIPI input to single DisplayPort output.
Modal4

Cookie 声明

本网站使用浏览器纪录 Cookie 来提供您最好的使用体验，我们使用的 Cookie 也包括了第三方 Cookie。相关信息请访问我们的隐私权政策。如果您选择继续浏览或关闭这个提示，便表示您已接受本网站的Cookie声明。

同意

隐私权政策

‧说明
ITE遵守台湾的《个人资料保护法》来搜集、处理、使用和保护个人资料，我们不会主动搜集您的个人数据。

‧个人资料的搜集及使用
在ITE官网进行基本的浏览、搜寻及下载行为时，网站不会进行任何个人资料的搜集行为。若您使用网站的”联络我们”功能，本公司将会搜集您的个人姓名、公司名称、电子邮件及联络电话等个人资料。搜集的访客个资仅作为您提出问题的回复及沟通使用，除本公司业务联系外，不做其他用途。网站会记录用户的上网IP、时间及浏览的网页数据，供本公司对全体使用者的浏览行为进行分析，并不会对各别使用者进行分析。

‧ 搜集资料的保全
ITE官网的任何资料传递均经由SSL加密，保障不被第三方窃取。您提供的数据将按照相关法律和本公司数据管理原则进行管理，该数据管理系统采用防火墙、入侵检测系统和病毒防护机制，以避免非法黑客入侵和恶意软件破坏。访客个资(含问题及回复)原则保存5年，访客可书面要求删除个资。

‧Cookie使用
本网站将会记录Cookie信息，包含您使用的设备、来源IP地址及浏览的页面，并不会搜集您的个人资料。搜集的信息用来优化网站浏览的体验，及进行网站浏览的统计分析，作为改善我们网站内容与服务的参考。您可以在浏览器设定修改对Cookie的接受程度，但若您拒绝所有的Cookie，本网站的某些功能将可能无法正常执行。

关闭