goldennet

Video Link

IT6113: High Speed MIPI DSI 4 Lane to 8 Lane Bridge

  • Poduct Information

  • Specification Table

  • Poduct Information

  • Specification Table

  • Download

Poduct Information

IT6113: High Speed MIPI DSI 4 Lane to 8 Lane Bridge

The IT6113 MIPI DSI video bridge is a 4-lane-in, 8-lane-out high speed data converter/splitter. It integrates a 4-lane single–link MIPI DSI receiver and an 8-lane dual-link MIPI DSI transmitter. The DSI bridge may be configured to a half-rate data converter or a full-rate data splitter for different applications.


When acting as a half-rate data converter, the 8-lane transmitter of IT6113 is capable of outputting either L/R pixels or Even/Odd pixels in the first and the second 4-lane link according to the backend panel's ability. When in splitter mode, either one of the TX links can be switched on/off independently. The RX front end of IT6113 supports a data rate of up to 2.5 Gbs per lane, enabling processing of a video signal of 2560X1600@70Hz, 2176X1536@85Hz, or other ultra-high resolution format such as WUXGA in converter mode. The TX PHY of IT6113 supports a data rate of up to 1.5 Gbs per lane.


The IT6113 is compliant with MIPI DSI Version 1.1 and MIPI D-PHY Version 1.1. It supports RGB Packed Pixel Stream 18-bit, 24-bit, 30-bit, and 36-bit format.


The IT6113 supports VRR function, so that VRR feature can be implemented in the system.


The IT6113 is configured and controlled via I2C bus, including parameter settings and low power mode command R/W.


IT6113 is packed in 48-pin 6x6 QFN package. It operates with 1.0V and 1.8V power supply.

Features

  • MIPI DSI 4-lane input, 8-lane output converter/splitter bridge
  • Supports 4-lane to 8-lane half-speed converter in L/R mode or Even/Odd mode
  • Supports 4-lane to 4-lane bypass repeater or 4-lane to 2*4-lane bypass splitter mode
  • RX D-PHY capable of operating in link rate up to 2.5 Gbs per lane, enabling support of 2560X1600@70Hz, 2176X1600 @85Hz or other video stream
  • TX D-PHY capable of operating in link rate up to 1.5 Gbs per lane
  • Maximum video frame size: 8k*4k (with RX link rate not exceeding 2.5 Gbs)
  • Compliant with MIPI DSI Version 1.1 and MIPI D-PHY Version 1.1
  • Supports MIPI RX D-PHY High Speed De-skew feature for high speed(over 1.5 Gbs) utilization as specified in D-PHY specification ver. 1.2
  • Supports MIPI DSI Packed Pixel Stream in RGB 18/24/30/36-bit format
  • Supports MIPI DSI Loosely Packed Pixel Stream in RGB 18-bit format
  • Supports MIPI DSI Low Power Command in both TX0 and TX1 output port(Commands issued by FW via I2C)
  • Supports internal MIPI DSI pattern generator for both TX0 and TX1 output port with external MCLK
  • Supports Sync Event/Sync Pulse mode
  • Supports Low Power Mode entry in all lines during V-blanking
  • Supports Lane/Polarity swap in both RX/TX sides
  • Supports Continuous-clock mode only
  • Supports DSI 4-lane per link only
  • Supports progressive mode only
  • Supports VRR function
  • Power supply: 1.0V and 1.8V
  • 48-pin (6 mm x 6 mm) QFN package
  • RoHS-compliant and Halogen-Free

Specification Table

After years of technology development, ITE has owned many types of advanced Silicon Intellectual Property (SIP) and highly integrated technology of system software/hardware.

PART NO.

PACKAGE TYPE

DESCRIPTION

FLASH SUPPORT

IT6113

48-pin QFN (6 mm x 6 mm)

High Speed MIPI DSI 4 lane to 8 lane Bridge

Explore

Modal4

隐私权政策

‧说明
ITE遵守台湾的《个人资料保护法》来搜集、处理、使用和保护个人资料,我们不会主动搜集您的个人数据。

‧个人资料的搜集及使用
在ITE官网进行基本的浏览、搜寻及下载行为时,网站不会进行任何个人资料的搜集行为。若您使用网站的”联络我们”功能,本公司将会搜集您的个人姓名、公司名称、电子邮件及联络电话等个人资料。搜集的访客个资仅作为您提出问题的回复及沟通使用,除本公司业务联系外,不做其他用途。网站会记录用户的上网IP、时间及浏览的网页数据,供本公司对全体使用者的浏览行为进行分析,并不会对各别使用者进行分析。

‧ 搜集资料的保全
ITE官网的任何资料传递均经由SSL加密,保障不被第三方窃取。您提供的数据将按照相关法律和本公司数据管理原则进行管理,该数据管理系统采用防火墙、入侵检测系统和病毒防护机制,以避免非法黑客入侵和恶意软件破坏。访客个资(含问题及回复)原则保存5年,访客可书面要求删除个资。

‧Cookie使用
本网站将会记录Cookie信息,包含您使用的设备、来源IP地址及浏览的页面,并不会搜集您的个人资料。搜集的信息用来优化网站浏览的体验,及进行网站浏览的统计分析,作为改善我们网站内容与服务的参考。您可以在浏览器设定修改对Cookie的接受程度,但若您拒绝所有的Cookie,本网站的某些功能将可能无法正常执行。

关闭