ITE聯陽 | Product

Video Link

IT6626: HDMI 2.1 to Dual Port MIPI CSI/DSI Converter

Product Information
Specification Table

Product Information
Specification Table
Download

Product Information

IT6626: HDMI 2.1 to Dual Port MIPI CSI/DSI Converter

The IT6626 is a high performance HDMI-to-MIPI video converter. It integrates an HDMI 2.1 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI C-PHY/D-PHY. For AR/VR, mobile or other display applications requiring to translate the HDMI protocol to the MIPI output, the IT6626 is an optimized low power and high quality solution.

The IT6626's HDMI RX is compliant with the HDMI 2.1a specification and is backwards-compatible with the HDMI 2.0b and HDMI 1.4b specifications. It supports data rates up to 12 Gbps per channel in FRL mode or 6 Gbps in TMDS mode. The conversion of high resolution video signals such as 4k2k@120Hz or 8k4k@30Hz could be easily achieved by its high bandwidth. The IT6626 supports the conversion of color space from RGB to YUV444/422/420 and vice versa. After the optional video processing, varied RGB/YUV video formats could be transmitted by the MIPI CSI/DSI transmitter according to the applications. Users can furthermore adopt 1/2/3-trio MIPI C-PHY links or 1/2/4-lane MIPI D-PHY links according to the system requirement.

The IT6626 is capable of separating audio content in various formats from HDMI input stream, including I2S, DSD, SPDIF, HBR, and so on. According to the input content, 8-channel I2S, 8-channel DSD audio, or SPDIF data may be output to peripheral audio processors or DACs.

The IT6626 builds in HDCP 1.4/2.3 hardware engines. Each IT6626 chip comes preprogrammed with a unique HDCP key, in compliance with the HDCP 1.4/2.3 standards so as to provide secure transmission of high-definition content. Users of the IT6626 need not purchase any HDCP keys or ROMs.

The IT6626 provides a complete solution of Consumer Electronics Control (CEC) function. This optional CEC feature of HDMI specification allows the user to control two or more CEC-enabled devices through HDMI network. With the embedded CEC PHY, user can use high-level software API to easily implement all the necessary remote control commands. The CEC bus related protocol is handled by the CEC PHY which eliminates extra loading of the MCU.

With embedded MCU and Flash, customers need no external Flash and MCU, and thus saving the BOM cost and board size.

The IT6626 is packed in a 76-pin 9x9 QFN package.

Features

HDMI 2.1 RX

- Compliant with HDMI 1.4b, HDMI 2.0b, HDMI 2.1a, HDCP 1.4 and HDCP 2.3 standards

- Bandwidth up to 48 Gbps/4-channel in FRL mode, supporting ultra-HD resolution 8K4K format

- Bandwidth up to 18 Gbps/3-channel in TMDS mode, supporting 4K2K@60 format

- Adaptive and programmable input equalization supporting long and short cables

- Supports DC or AC coupling at TMDS inputs for direct or level shifting connection

- Active source detection for auto low power state implementation

- Supports DSC compressed video stream pass-through mode

- Supports HDMI 2.1 Variable Refresh Rate (VRR)

- Supports static High Dynamic Range (HDR)

- Supports HDMI1.4/2.0/2.1 packets

- Pure hardware HDCP engine increasing the robustness and security of HDCP operation

- Integrated pre-programmed HDCP keys

- Embedded EDID RAM saving external EDID ROM cost

- Embedded hardware controlled CEC PHY

MIPI CSI/DSI TX
PHY

- Supports MIPI C-PHY and D-PHY interfaces

- Compliant with MIPI C-PHY version 1.2 and MIPI D-PHY version 1.2

- Supports 2-port 1/2/3-trio MIPI C-PHY transmission with bandwidth up to 5.7 Gbps per trio, capable of transmitting non-DSC 4Kx2K@120Hz or 8Kx4K@30Hz RGB 10-bpc video with two-port output

- Supports 2-port 1/2/4-lane MIPI D-PHY transmission with bandwidth up to 2.5 Gbps per lane, capable of transmitting non-DSC 4Kx2K@60Hz RGB 10-bpc with two-port output

- Supports HS data and Escape Low power command transmission and ULPS state

- Supports lane/polarity output swap

Protocol

- Supports MIPI CSI and DSI protocols

- Compliant with MIPI CSI-2 version 1.3 and MIPI DSI version 1.2

- Supports MIPI CSI RGB888/666/565 formats

- Supports MIPI CSI YUV422 8-bit/10-bit formats

- Supports MIPI CSI legacy YUV420 8-bit format

- MIPI CSI operation supports interlaced mode and toggling frame number

- Supports MIPI DSI packed pixel stream in RGB 30/24/16-bit formats

- Supports MIPI DSI Sync Event and Sync Pulse modes

- Supports VRR function on progressive mode on CSI/DSI

- Supports DSC video packet for DSC bypass

HDMI to MIPI Conversion

- Supports DSC compressed video stream and PPS packet pass-through to one MIPI TX port

- Supports bi-direction color space conversions (CSC) between RGB and YCbCr color spaces with programmable coefficients

- Supports YCbCr chroma conversions between 4:4:4, 4:2:2 and 4:2:0 samplings

- HDMI to MIPI supports 1-to-2 even/odd or left/right split function or 1-to-1 mirror output mode to either one or both TX ports

- Supports odd/even or left/right swap on the 2 output ports

Audio

- Supports audio extraction from HDMI and output through I2S/TDM, SPDIF and DSD audio interfaces

- Up to four I2S interfaces supporting maximum 8-channel audio, with sample rates of 32–192 kHz and sample sizes of 16–24 bits

- SPDIF interface supporting PCM, Dolby Digital, DTS digital audio at up to 192 kHz frame rate

- Supports high-bit-rate (HBR) audio such as DTS-HD and Dolby TrueHD through the four I2S interface or the SPDIF interface, with frame rates as high as 768 kHz

- Compatible with IEC 60958 and IEC 61937

System

- Embedded pattern generator

- Embedded MCU and Flash Memory

- Supports I2C master function by GPIO

- Supports information block interface through I2C slave

- Intelligent, programmable power management

- Built-in AEC-Q100 burn-in test

- 76-pin (9 mm x 9 mm) QFN package

- RoHS-compliant and Halogen-Free

Specification Table

After years of technology development, ITE has owned many types of advanced Silicon Intellectual Property (SIP) and highly integrated technology of system software/hardware.

PART NO.

PACKAGE TYPE

DESCRIPTION

FLASH SUPPORT

IT6626

76-pin QFN (9 mm x 9 mm)

HDMI 2.1 to Dual-Port MIPI CSI/DSI Converter

Explore

IT6122: MIPI to LVDS Converter

The IT6122 is a high-performance and low-power MIPI to LVDS converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and LVDS specifications. The IT6122 supports four lanes MIPI RX and 2-Link LVDS TX interface. The data transfer rate of MIPI RX is up to 1Gbps per lane and the LVDS TX supports as high as 1.05Gbps per channel.

IT6113: High Speed MIPI DSI 4 Lane to 8 Lane Bridge

The IT6113 MIPI DSI video bridge is a 4-lane-in, 8-lane-out high speed data converter/splitter. It integrates a 4-lane single–link MIPI DSI receiver and an 8-lane dual-link MIPI DSI transmitter. The DSI bridge may be configured to a half-rate data converter or a full-rate data splitter for different applications.

IT6510: 4 Lanes DisplayPort 1.2 to 4 Lane MIPI-CSI/DSI Converter

The IT6510 is a high-performance single-chip DisplayPort to MIPI-CSI/DSI converter. Combined with DisplayPort receiver, MIPI transmitter, the IT6510 support DisplayPort input and MIPI-CSI/DSI output by conversion function.

IT6520: USB-C (DP Alt Mode) & Power Delivery Controller Built-in 4 Lane DP 1.4 to MIPI Converter

The IT6520FN is a highly integrated USB type-C/PD controller with DisplayPort to MIPI converter. It is suitable for dongle application. The IT6520FN has integrated type-C DFP/UFP/DRP resistors and controls logic with dead battery support.

IT6616: HDMI 1.4 to MIPI CSI/DSI Converter

IT6616 is a high performance HDMI-to-MIPI video converter. It integrates an HDMI 1.4 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI D-PHY. For AR/VR, mobile or other display applications that require to translating HDMI protocol to MIPI CSI/DSI output, the IT6616 is an optimized low power and high quality solution.

IT6625: HDMI 2.0 to Dual Port MIPI CSI/DSI Converter

The IT6625 is a high performance HDMI-to-MIPI video converter. It integrates an HDMI 2.0 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI C-PHY/D-PHY. For AR/VR, mobile or other display applications requiring to translate the HDMI protocol to the MIPI output, the IT6625 is an optimized low power and high quality solution.

IT6161: MIPI to HDMI Converter

The IT6161 is a high-performance and low-power MIPI to HDMI converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and HDMI 1.4b, HDCP 1.4 and backward compatible to DVI 1.0 specifications. The IT6161 supports four lanes MIPI RX and HDMI TX interface. The data transfer rate of MIPI RX is up to 1Gbps per lane.

IT6162: Dual port MIPI to HDMI 2.0 Converter with Embedded MCU

The IT6162 is a high-performance and low-power dual-port MIPI DSI to HDMI 2.0 converter. It receives one or dual port MIPI DPHY input with low-quality MIPI cables, and converts it to TMDS output, of which current levels and pre-emphasis are both programmable.

IT6151FN: MIPI to eDP Converter

The IT6151 is a high-performance and low-power MIPI to eDP converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and eDP 1.3 specifications. The IT6151 supports four lanes MIPI RX and four lane eDP TX interface. The data transfer rate of MIPI RX is up to 1Gbps per lane and both RBR/HBR are supported by eDP TX interface.

IT6152: Dual-port MIPI to DisplayPort 1.4 Converter with Embedded MCU

The IT6152 is a high-performance and low-power dual-port MIPI to DisplayPort converter. With two MIPI receivers and one DisplayPort transmitter, the IT6152 converts dual or single port MIPI input to single DisplayPort output.

goldennet

IT6626: HDMI 2.1 to Dual Port MIPI CSI/DSI Converter

Features