ITE聯陽 | Product

Video Link

IT6113: High Speed MIPI DSI 4 Lane to 8 Lane Bridge

Product Information
Specification Table

Product Information
Specification Table
Download

Product Information

IT6113: High Speed MIPI DSI 4 Lane to 8 Lane Bridge

The IT6113 MIPI DSI video bridge is a 4-lane-in, 8-lane-out high speed data converter/splitter. It integrates a 4-lane single–link MIPI DSI receiver and an 8-lane dual-link MIPI DSI transmitter. The DSI bridge may be configured to a half-rate data converter or a full-rate data splitter for different applications.

When acting as a half-rate data converter, the 8-lane transmitter of IT6113 is capable of outputting either L/R pixels or Even/Odd pixels in the first and the second 4-lane link according to the backend panel's ability. When in splitter mode, either one of the TX links can be switched on/off independently. The RX front end of IT6113 supports a data rate of up to 2.5 Gbs per lane, enabling processing of a video signal of 2560X1600@70Hz, 2176X1536@85Hz, or other ultra-high resolution format such as WUXGA in converter mode. The TX PHY of IT6113 supports a data rate of up to 1.5 Gbs per lane.

The IT6113 is compliant with MIPI DSI Version 1.1 and MIPI D-PHY Version 1.1. It supports RGB Packed Pixel Stream 18-bit, 24-bit, 30-bit, and 36-bit format.

The IT6113 supports VRR function, so that VRR feature can be implemented in the system.

The IT6113 is configured and controlled via I2C bus, including parameter settings and low power mode command R/W.

IT6113 is packed in 48-pin 6x6 QFN package. It operates with 1.0V and 1.8V power supply.

Features

MIPI DSI 4-lane input, 8-lane output converter/splitter bridge
Supports 4-lane to 8-lane half-speed converter in L/R mode or Even/Odd mode
Supports 4-lane to 4-lane bypass repeater or 4-lane to 2*4-lane bypass splitter mode
RX D-PHY capable of operating in link rate up to 2.5 Gbs per lane, enabling support of 2560X1600@70Hz, 2176X1600 @85Hz or other video stream
TX D-PHY capable of operating in link rate up to 1.5 Gbs per lane
Maximum video frame size: 8k*4k (with RX link rate not exceeding 2.5 Gbs)
Compliant with MIPI DSI Version 1.1 and MIPI D-PHY Version 1.1
Supports MIPI RX D-PHY High Speed De-skew feature for high speed(over 1.5 Gbs) utilization as specified in D-PHY specification ver. 1.2
Supports MIPI DSI Packed Pixel Stream in RGB 18/24/30/36-bit format
Supports MIPI DSI Loosely Packed Pixel Stream in RGB 18-bit format
Supports MIPI DSI Low Power Command in both TX0 and TX1 output port(Commands issued by FW via I2C)
Supports internal MIPI DSI pattern generator for both TX0 and TX1 output port with external MCLK
Supports Sync Event/Sync Pulse mode
Supports Low Power Mode entry in all lines during V-blanking
Supports Lane/Polarity swap in both RX/TX sides
Supports Continuous-clock mode only
Supports DSI 4-lane per link only
Supports progressive mode only
Supports VRR function
Power supply: 1.0V and 1.8V
48-pin (6 mm x 6 mm) QFN package
RoHS-compliant and Halogen-Free

Specification Table

After years of technology development, ITE has owned many types of advanced Silicon Intellectual Property (SIP) and highly integrated technology of system software/hardware.

PART NO.

PACKAGE TYPE

DESCRIPTION

FLASH SUPPORT

IT6113

48-pin QFN (6 mm x 6 mm)

High Speed MIPI DSI 4 lane to 8 lane Bridge

Explore

IT6122: MIPI to LVDS Converter

The IT6122 is a high-performance and low-power MIPI to LVDS converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and LVDS specifications. The IT6122 supports four lanes MIPI RX and 2-Link LVDS TX interface. The data transfer rate of MIPI RX is up to 1Gbps per lane and the LVDS TX supports as high as 1.05Gbps per channel.

IT6510: 4 Lanes DisplayPort 1.2 to 4 Lane MIPI-CSI/DSI Converter

The IT6510 is a high-performance single-chip DisplayPort to MIPI-CSI/DSI converter. Combined with DisplayPort receiver, MIPI transmitter, the IT6510 support DisplayPort input and MIPI-CSI/DSI output by conversion function.

IT6520: USB-C (DP Alt Mode) & Power Delivery Controller Built-in 4 Lane DP 1.4 to MIPI Converter

The IT6520FN is a highly integrated USB type-C/PD controller with DisplayPort to MIPI converter. It is suitable for dongle application. The IT6520FN has integrated type-C DFP/UFP/DRP resistors and controls logic with dead battery support.

IT6616: HDMI 1.4 to MIPI CSI/DSI Converter

IT6616 is a high performance HDMI-to-MIPI video converter. It integrates an HDMI 1.4 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI D-PHY. For AR/VR, mobile or other display applications that require to translating HDMI protocol to MIPI CSI/DSI output, the IT6616 is an optimized low power and high quality solution.

IT6625: HDMI 2.0 to Dual Port MIPI CSI/DSI Converter

The IT6625 is a high performance HDMI-to-MIPI video converter. It integrates an HDMI 2.0 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI C-PHY/D-PHY. For AR/VR, mobile or other display applications requiring to translate the HDMI protocol to the MIPI output, the IT6625 is an optimized low power and high quality solution.

IT6626: HDMI 2.1 to Dual Port MIPI CSI/DSI Converter

The IT6626 is a high performance HDMI-to-MIPI video converter. It integrates an HDMI 2.1 receiver and a dual-mode MIPI CSI/DSI transmitter with MIPI C-PHY/D-PHY. For AR/VR, mobile or other display applications requiring to translate the HDMI protocol to the MIPI output, the IT6626 is an optimized low power and high quality solution.

IT6161: MIPI to HDMI Converter

The IT6161 is a high-performance and low-power MIPI to HDMI converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and HDMI 1.4b, HDCP 1.4 and backward compatible to DVI 1.0 specifications. The IT6161 supports four lanes MIPI RX and HDMI TX interface. The data transfer rate of MIPI RX is up to 1Gbps per lane.

IT6162: Dual port MIPI to HDMI 2.0 Converter with Embedded MCU

The IT6162 is a high-performance and low-power dual-port MIPI DSI to HDMI 2.0 converter. It receives one or dual port MIPI DPHY input with low-quality MIPI cables, and converts it to TMDS output, of which current levels and pre-emphasis are both programmable.

IT6151FN: MIPI to eDP Converter

The IT6151 is a high-performance and low-power MIPI to eDP converter, fully compliant with MIPI D-PHY 1.1, DSI 1.1 and eDP 1.3 specifications. The IT6151 supports four lanes MIPI RX and four lane eDP TX interface. The data transfer rate of MIPI RX is up to 1Gbps per lane and both RBR/HBR are supported by eDP TX interface.

IT6152: Dual-port MIPI to DisplayPort 1.4 Converter with Embedded MCU

The IT6152 is a high-performance and low-power dual-port MIPI to DisplayPort converter. With two MIPI receivers and one DisplayPort transmitter, the IT6152 converts dual or single port MIPI input to single DisplayPort output.

goldennet

IT6113: High Speed MIPI DSI 4 Lane to 8 Lane Bridge

Features