ITE聯陽 | Product

Video Link

IT6516BFN: Single Chip DisplayPort to VGA Converter with Embedded MCU

Product Information
Specification Table

Product Information
Specification Table
Download

Product Information

IT6516BFN: Single Chip DisplayPort to VGA Converter with Embedded MCU

The IT6516BFN is a high-performance single-chip DisplayPort to VGA converter. Combined with DisplayPort receiver and triple DACs, the IT6516BFN supports DisplayPort input and VGA output by conversion function. The built-in DisplayPort receiver is fully compliant with DisplayPort 1.1a specification. With 2-lane HBR (High-Bit-Rate) DisplayPort receiver, the IT6516BFN can support VESA resolution up to WUXGA and UXGA. Also, the built-in triple DACs can support up to 8 bit deep colors.

The single chip IT6516BFN provides high-performance, cost-effective, DP2VGA conversion function, and it makes modern NB or MB compatible with traditional VGA only projectors, monitors, and TVs.

With embedded MCU and Flash, IT6516BFN is easy to program through the ISP interface. Customers need no external Flash and MCU, which saves the BOM cost and board size.

With embedded 3.3V to 1.8V Power Regulator, IT6516BFN can optionally use single 3.3V power supply for PCB design. Customers need no external power regulator to save the BOM cost and board size. And when the system provides both 1.8V and 3.3V supply, the IT6516BFN's embedded regulator can be disabled to save power consumption.

With embedded Crystal, customers need no external crystal and related application circuits to save the BOM cost and board size.

Features

Features (DisplayPort RX)

Compliance with DisplayPort Specification V1.1a at 1.62/2.7 Gbps data rate (Low bit rate/High bit rate)
Support flexible 1/2 lanes configurations; 5.4 Gbps data rate support (2 lanes at 2.7 Gbps)
Support DPCD Rev.1.1
Support Spread Spectrum Clocking up to 0.5% down-spread to reduce EMI
Support Source Connection Detection through AUX channel DC levels
Automatic loss of signal detection for Link management
Intelligent, programmable power management
Embedded Block0 EDID RAM to saving BOM cost
Compliance with "DP only" or "DP++" Source device

Features (VGA DACs)

Tripe 8-Bit DAC Converters
230 MSPS Throughput Rate
Embedded Compensated Circuits
Complementary Outputs
DAC Output Current Range 2 mA to 18.5 mA
VESA VSIS V1r2 Compliant

Features (Combined)

Support up to QXGA (2048 x 1536), QWXGA (2048 x 1280 RB), WUXGA (1920 x 1200 RB) and UXGA (1600 x 1200) VESA display format
Support DP Input deep color depth up to 12 bit, and support VGA output color depth to 8 bit
Embedded MCU and Flash
8KV ESD Protection (Human Body Mode) on VGA pins
Embedded 3.3V to 1.8V power regulator
Embedded Crystal
Active mode current consumption at 162 Mhz UXGA resolution is ~245 mA
32-pin QFN (4 mm x 4 mm) package
RoHS Compliant (100% Green available)

Specification Table

After years of technology development, ITE has owned many types of advanced Silicon Intellectual Property (SIP) and highly integrated technology of system software/hardware.

PART NO.

PACKAGE TYPE

DESCRIPTION

FLASH SUPPORT

IT6516BFN

32-pin QFN (4 mm x 4 mm)

Single Chip DisplayPort to VGA Converter with Embedded MCU

Explore

IT6561: Single Chip 4 Lane DisplayPort to HDMI Converter with Embedded MCU

The IT6561FN is a high-performance single-chip DisplayPort to HDMI converter. Combined with DisplayPort receiver, HDMI transmitter, the IT6561FN support DisplayPort input and HDMI output by conversion function.

IT6562: Single Chip 4 Lane DisplayPort to HDMI/VGA Converter with Embedded MCU

The IT6562FN is a high-performance single-chip DisplayPort to HDMI and VGA converter. Combined with DisplayPort receiver, HDMI transmitter and triple DACs, the IT6562FN support DisplayPort input and HDMI/VGA output by conversion function.

IT6563: Single Chip 4 Lane DisplayPort 1.2 to HDMI 2.0 Converter with Embedded MCU

The IT6563FN is a high-performance single-chip DisplayPort to HDMI converter. Combined with DisplayPort receiver and HDMI transmitter, the IT6563FN support DisplayPort input and HDMI output by conversion function.

IT6564: Single Chip 4 Lane DisplayPort 1.2 to HDMI 2.0/VGA Converter with Embedded MCU

The IT6564FN is a high-performance single-chip DisplayPort to HDMI and VGA converter. Combined with DisplayPort receiver, HDMI transmitter and triple DACs, the IT6564FN support DisplayPort input and HDMI/VGA output by conversion function.

IT6565: Single Chip 2 Lane DisplayPort 1.4 to HDMI 2.0 Converter with Embedded MCU

The IT6565FN is a high-performance single-chip DisplayPort to HDMI converter. Combined with DisplayPort receiver and HDMI transmitter, the IT6565FN support DisplayPort input and HDMI output by conversion function.

IT6566: Single Chip 2 Lane DisplayPort 1.4 to HDMI 2.0/VGA Converter with Embedded MCU

The IT6566FN is a high-performance single-chip DisplayPort to HDMI and VGA converter. Combined with DisplayPort receiver, HDMI transmitter and triple DACs, the IT6566FN support DisplayPort input and HDMI/VGA output by conversion function.

IT6505E DisplayPort 1.1a Transmitter (The World’s First DP CTS 1.1 Source Device Certified)

The IT6505 is a high-performance DisplayPort 1.1a transmitter, fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications. The IT6505 supports color depth of up to 36 bits (12 bits/color) and ensures robust transmission of high-quality uncompressed video content, along with uncompressed and compressed digital audio content.

IT6507: Single Chip DisplayPort 1.2 Transmitter

The IT6507 is a high-performance DisplayPort 1.2a transmitter, fully compliant with DisplayPort 1.2a, HDCP 1.3 /2.3 specifications. The IT6507 supports color depth of up to 36 bits (12 bits/color) and ensures robust transmission of high-quality uncompressed video and audio content.

IT6508: 4 Lanes DisplayPort 1.2 to Dual Bus TTL Converter

The IT6508 is a high-performance single-chip DisplayPort to TTL output converter.The build-in DisplayPort receiver is fully compatible with DisplayPort 1.2a and HDCP 1.3/2.3 specifications. With 4-lane HBR2 (High-Bit-Rate 2) configuration, the DP receiver can support VESA resolution up to WUXGA (1920 x 1200@120 Hz) or WQXGA (2560 x 1600 RB@120 Hz) or support CEA resolution up to 1080P@120 Hz or 4K x 2K@60 Hz.

IT6251FN: LVDS to DisplayPort 1.1a Transmitter

The IT6251 is a high-performance single-chip De-SSC LVDS to DisplayPort converter. Combined with LVDS receiver and DisplayPort Transmitter, the IT6251 supports LVDS input and DisplayPort 1.1a output by conversion function. The build-in LVDS receiver can support single-link and dual-link LVDS inputs, and the build-in DisplayPort transmitter is fully compliant with DisplayPort 1.1a specification. With high speed LVDS RX, the IT6251 can support resolution up to 1080P and UXGA and 10-bit deep colors.

In order to reduce the EMI noise on legacy system application, the traditional LVDS source will transmit differential signals with spread spectrum, but this spread spectrum does not be allowed for DisplayPort protocol. The IT6251 also build-in unique De-SSC ( De-Spread Spectrum ) function , it can help customers easily to adopt the IT6251 on the EMI-concerned platform, with SSC has been generated from LVDS source processors.

goldennet

IT6516BFN: Single Chip DisplayPort to VGA Converter with Embedded MCU

Features